* Editor's Note: We apologize, but there seems to have been a glitch with the comments section on our blog. It's fixed now, but we?ve missed out on some really interesting comments from our readers! So keep it up, and you should start seeing your comments appear. Enjoy today?s post!While it is only March but, Spring is well upon us. The trees and flowers are in bloom; pollen?s in the air, and it seems like it might be a good time to pull the dehumidifier out of winter hibernation to prep for this spring and summer. Maintenance is not extensive, but it is important in keeping your dehumidifier running properly throughout the wettest part of the year.Depending on where you have been storing the unit, it?s always a good idea to do a visual inspection, and for good reason. One spring I pulled my dehumidifier out of an out-building I had been storing it in, only to find the power cord had been chewed into thirds. You will also want to check the tank, and while many have smaller openings, it never hurts to inspect for? critters or things that might be nesting.A cloth dampened with warm water or a mild soapy mix will remove most markings, dirt or debris on the exterior, and it never hurts to spray parts of the dehumidifier tank that touch water with Vital Oxide. I have found this to be an indispensible tool when sanitizing or removing mold around the house.Most modern dehumidifiers come with an air filter. Some, like Aprilaire dehumidifiers are styled similar to your HVAC filter, and work well at trapping large and medium sized particles that can accumulate and damage the motor and fan. Others are simply a mesh type filter meant to really only keep dust bunnies and hair out of the unit. Replace the filter if needed or simply use compressed air to blow the filter out.For larger dehumidifiers, you may have easy access to the coils or motor. If so, now is the perfect time to again use compressed air to blow out debris, dust or dirt that may be accumulating around the coils or motor. Take care to use a lower pressure air as not to damage the soft copper or aluminum coils.After you?ve reassembled the dehumidifier, you?re all set to try it out. Before you start the machine, be sure that is has sat in the normal, upright, operating position for 24 hours (particularly if it has been stored on its side or for some reason, upside down.... don't ask). With all the complete, plug it in, and turn it on. If you have any problems, check the tank. An improperly seated water tank is the most frequent and easily remidied problem. Next, take a look at the troubleshooting section in the user manual. If you don?t have the manual, check the product page on our site, as each will have a copy. If all else fails, contact us or the manufacturer to try and resolve any issues.A dehumidifier is an important part of many households across the country. So when the humidity goes up and the rain falls down, keep mold growth and dust mite levels in check by maintaining the proper relative humidity with a home dehumidifier. read more..